Subnautica 2 official cover art

Collect Sulfur for your first Repair Tool

Quick answer

Look for loose Sulfur near the rock pillar beyond the Welcome Center. Save one piece for the Repair Tool. Large deposits need the Sonic Resonator; deeper hot-region gathering needs Heat Tolerance preparation.

How this guide was checked

Coverage: Early Access 1.2 · Buddy System Hotfix 2 (October 6) · official sources checked October 23, 2026 UTC · older routes retain their source/build limits. Research checked 8 Oct 2026. Updated 25 Oct 2026

This guide uses the linked sources and any attributed demonstrations. Platform differences and limitations are noted with the advice they affect.

See the 5 sources
5 sources
Creator clipChecked on screen · 25 Oct 20265 steps1 moment · 0:07
  1. 1:19–1:26Spotting loose Sulfur pieces on rockCollect a loose piece or return with the mining tool · Ape Knight Gaming

See it first · Collect a loose piece or return with the mining tool ↓

Older footage · checked Oct 25, 2026 · before Subnautica 2 Early Access 1.2 (Buddy System, August 19, 2026)

1:19–1:26 · 7 sSpotting loose Sulfur pieces on rock

Check the guide’s version notes before following older footage.

Ape Knight GamingFull video ↗
Credits

“Subnautica 2 Sulfur Location Guide. How to Get Sulfur and Where to Find Sulfur in Subnautica 2” by Ape Knight Gaming · May 16, 2026 · Early Access launch window (uploaded 2026-05-16); predates the Adaptive Measures and Buddy System updates

Independent creator · no partnership implied

Creator? Ask us to remove this

Before you start

  • Carry oxygen support and leave room for a pickup.
  • Prepare Heat Tolerance before entering the hotter area; use the Angel Combs guide.
1

Search the pillar beyond the Welcome Center

PC Gamer places an early Sulfur spot near Coral Crabs, roughly 200 m southeast of the Lifepod at about 120° and 25 m deep. Use the pillar and nearby science platform as landmarks; these are approximate published directions.

  1. Pass the Welcome Center and look for the rock pillar in the open seabed.
  2. Check the pillar and surrounding sand for yellow crystals.
  3. Confirm the Sulfur interaction label before collecting a loose piece.
Sources for this section
2

Collect a loose piece or return with the mining tool

Small Sulfur pieces can be picked up by hand. Larger deposits require the Sonic Resonator; use the mining guide if you have not built it yet.

Kingy trip check: confirm your pickup in the inventory, keep a return landmark and leave while you still have oxygen for the journey back.

Older footage · checked Oct 25, 2026 · before Subnautica 2 Early Access 1.2 (Buddy System, August 19, 2026)

1:19–1:26 · 7 sSpotting loose Sulfur pieces on rock

On screen: On steep brown rock faces between about 78 and 95 m, small lumpy yellow crystal pieces sit loose against the stone; the view moves between several of them up close.

Check the guide’s version notes before following older footage.

Ape Knight GamingFull video ↗
Credits

“Subnautica 2 Sulfur Location Guide. How to Get Sulfur and Where to Find Sulfur in Subnautica 2” by Ape Knight Gaming · May 16, 2026 · Early Access launch window (uploaded 2026-05-16); predates the Adaptive Measures and Buddy System updates

Independent creator · no partnership implied

Creator? Ask us to remove this

1:19–1:26Spotting loose Sulfur pieces on rock
Sources for this section
3

Separate the first pickup from a deeper hot-region trip

GamesRadar describes some Sulfur near the edge of the eastern hot region before the damaging heat. More is reported inside the hot area, where it recommends Heat Tolerance.

A nearby deposit does not make the whole route safe. Watch temperature, health and oxygen, and turn back when your supplies require it. Follow the Angel Combs guide before attempting deeper heated gathering.

Sources for this section
4

Reserve one Sulfur and check the Ingot quantity

Both PC Gamer recipe lists require 1 Sulfur, 1 Wiring Kit and 1 Basic Battery for the Repair Tool. Their Titanium Ingot counts disagree: the dedicated Repair Tool guide lists 1, while the Sulfur guide lists 2. Check the full Fabricator recipe in your build before gathering an exact batch.

Buddy System changed the Repair Tool unlock to two scans. Follow the existing tool guide for fragment choices; older three-scan instructions are superseded.

Sources for this section
5

Use resource pings without relying on a guaranteed yield

Adaptive Measures fixed Sulfur failing to appear on the Scanner Station in one Heat Zone of the Overgrown Ruins. The Scanner Station guide explains how to select a resource contact.

This fix does not guarantee every contact or establish respawn timing. These are source-based gathering pointers; Kingy has not play-tested this route or measured a farming yield.

Sources for this section

You’re ready when…

Your checklist

0 of 4 complete · Loading saved progress…

Did this answer your question?

Sources · 5Official · Walkthrough · checked 8 Oct 2026 · Research checked 8 Oct 2026
Early Access 1.2: Buddy System ↗Current tool scans, co-op and base changes.Official ·
Repair Tool fragments ↗Locations and recipe only; obsolete three-scan count superseded.Walkthrough ·
Adaptive Measures update ↗July 8 release date, scan-progress and power-display fixes. Silver updates in Coral Gardens, nearby hint dialogue, misleading Sonic prompts and Silver nook pickup fixes. Storage excluded from nearby crafting and Moonpool size feedback.Official ·
Sulfur: early pillar and collection tools ↗Approximate pillar route and loose versus large deposits; Repair Tool Ingot quantity conflicts with the dedicated tool guide.Walkthrough ·
Sulfur near the edge of the hot region ↗Supports edge pickups before deeper heated collection; not a guarantee of a safe route.Walkthrough ·

Stuck? Tell us where

Say where you’re stuck in Subnautica 2. You get one hint at a time from a published kingy.wiki guide, and the answer and its clip stay covered until you ask.

If nothing matches, we keep your words (without emails, links or long numbers) to decide which answers to write next. Privacy